Austal Awarded Contract for Construction JHSV 2 a.m. to 3 p.m.
-
US Navy exercises contract options only a month after start of construction for JHSV 1
?
The US Navy has exercised contract options funding the construction of two additional Austal Joint High Speed Vessels (JHSV) – as part of an existing 10-vessel, AUD$1.8 billion program.
Austal previously received US Navy funding for long lead-time material, including diesel engines, water jets and reduction gears, for these two vessels in June 2009. The additional work is valued at approximately AUD$225 million.
Intended as the US Department of Defense’s next-generation multi-use platform, the two 103 metre high speed vessels will be constructed at Austal’s US facility, located in Mobile, Alabama.
Austal was selected as Prime contractor for the JHSV program in November 2008, which included construction of the first JHSV and options for nine additional vessels to be exercised between FY09 and FY13. Construction of the first Austal JHSV commenced in December 2009.
Austal Managing Director Bob Browning commented: “By exercising Options 2 and 3, the US Navy has signalled its support of this important and significant multi-vessel program.”
“The JHSV program could serve to extend the United States’ ability to provide humanitarian relief globally and Austal is pleased to be able to contribute to this effort through the speedy delivery of this highly flexible, low-cost vessel.”
Similar to the Austal-built “WestPac Express” operated by the US Marines for the past nine years, but with the addition of a helo deck, the JHSV will be capable of transporting troops and their equipment, supporting humanitarian relief efforts, operating in shallow waters, and reaching speeds in excess of 35 knots fully loaded.
Two other Austal USA-built high-speed vehicle ferries, “Alakai” and “Huakai”, are currently supporting the ongoing relief operation in Haiti. The JHSVs will be a joint-use platform operated by both the United States Army and Navy. ? Austal USA’s President and Chief Operating Officer Joe Rella commented, “The Navy’s decision to proceed with full construction of the second and third JHSVs will serve to underpin the momentum in our shipyard and support Austal USA’s objective of driving greater efficiency and associated cost controls in its shipbuilding programs.’
Construction is also underway at Austal USA on a second 127 metre Austal-designed and built Littoral Combat Ship (LCS) for the US Navy, with the first, “USS Independence”, commissioned earlier in the month. The US Navy continues to express a commitment to a 55-vessel LCS program.
Austal USA’s new state-of the-art 35,000m2 Modular Manufacturing Facility (MMF) facilitates the concurrent construction of both JHSV and LCS platforms. Austal USA’s workforce is expected to grow to more than 1500 as a result of the JHSV program.
Austal is teamed with General Dynamics Advanced Information Systems who will design, integrate, and test the ship’s electronic systems, including?an Open Architecture Computing?Infrastructure, internal and external communications, electronic navigation, aviation, and armament systems.
Click here for more information on this vessel.
Download high resolution images to accompany this release
Source: Austal
?Search to find what you want
Loading- Austal JHSV Construction Begins
- Austal Opens New Shipbuilding Facility
- The first three JHSV \ u0026 # 39; s get name
- First Austal LCS Joins U.S. Navy Fleet
- Austal hosts the second keel laying ceremony for Littoral Combat Ship, to supply the first
- Austal trimaran Next Generation Exceeds performance expectations
- Austal Launches Next-Generation trimaran
- General Dynamics Littoral Combat Ship team delivers Independence (LCS 2) and submit Keel for Coronado (LCS 4)
- ABS Americas Operations Government Announces Changes
- Austal announces Hong Kong passenger ferry Fleet Complete
- Northern European Freight Distributor Eyes Austal trimaran
- Austal Service receive Red Sea ferry
- Austal deliveries CotaiJet completed
- Austal order AUD 75 million pounds of water taxi
- Austal launches Malta patrol boats
Austal has received authorisation from the US Navy to commence construction on the first of up to ten 103-metre Joint High Speed Vessels (JHSV). Authorisation was given after Austal successfully completed the Production Readiness Review (PRR), which allows Austal’s Mobile, Alabama facility to immediately begin construction of Fortitude (JHSV 1). As the
Austal has officially opened its new state-of-the-art Modular Manufacturing Facility (MMF), equipping its US shipyard with the ability to build up to three 100 metre-plus vessels each year.
Speedy trio will be named Fortitude (JHSV 1), Vigilant (JHSV 2) and Spearhead (JHSV 3) Read at First three JHSV’s get names
Austal-designed and built Littoral Combat Ship (LCS), “USS Independence” has officially joined the operating forces of the United States Navy at an historic commissioning ceremony held near Austal’s Mobile, Alabama facility. Thousands of?Navy officials, politicians, industry delegates and spectators joined in welcoming “USS Independence” into the US Navy fleet,
Austal has hosted an abbreviated US Navy keel-laying ceremony for its second Littoral Combat Ship, Coronado (LCS 4). Fabrication has started on twelve of the twenty-eight modules that will make up this 127-metre trimaran design. Six of the twenty-eight modules are currently being outfitted with ships equipment such as
Austal’s next generation 102-metre trimaran has impressed during sea trials, achieving a speed of 39 knots at 90% MCR with 340 tonnes deadweight. The high speed vehicle ferry utilises Austal’s patented trimaran technology to deliver improved sea keeping, fuel efficiency, passenger comfort and payload capacity. Source: Austal
Austal has successfully launched its next generation 102 metre high speed trimaran vehicle-passenger ferry at its Western Australian facility. The vessel will now undergo final fit out prior to the commencement of sea trials in January. With a customisable seating arrangement for up to 1165 passengers, capacity for 254 cars and a
The General Dynamics Littoral Combat Ship Team today delivered Independence (LCS 2), its innovative high-speed trimaran combatant ship, to the United States Navy. The ship was constructed by team member Austal USA in Mobile. The delivery of Independence was preceded by the keel laying of its sister ship, Coronado (LCS
Growing work in the government sector, particularly with the US Navy and the US Coast Guard has ABS responding with changes to its Government Operations office located in Washington, DC. Key staff appointments and additional project management resources have been dedicated to best manage the important and growing government work that comes
Austal is celebrating the completion of fourteen high speed passenger ferries for Hong Kong’s Venetian Marketing Services Limited (VMSL) following the successful, on-schedule delivery of the final four vessels. Recognisable for their exciting electric blue livery, each of the 47.5 metre aluminium CotaiJets are now in operation
A large, Scandinavian based freight distributor has expressed strong interest in Austal’s newly launched 102 metre trimaran. The organisation’s North Pole-based Chief Executive Officer, known for his permanently jolly demeanour, recently visited Austal’s shipyard in Henderson, Western Australia to inspect the vessel. He stated that the vessel’s passenger and freight capacity together
Technical Management and Maintenance Package Demonstrates Service Capability The Government of Egypt’s two Austal-built high speed vehicle ferries have officially commenced operations between Egypt and Saudi Arabia, introducing a new standard of ferry service across the Red Sea. The important milestone was achieved on the back of Austal’s recent award of a
delivers final four in 14 ferry series Read at Austal completes Cotaijet deliveries
Four for Trinidad and Tobago Read at Austal books AUD 75 million water taxi order
First two of four launched less than seven months after contract signing Read at Austal launches Malta patrol boats
Loading...
